สินค้าแนะนำ (171)

ID : 76469
Brand : Miki Pulley
Model : 111
Last Update : 25/08/2558 15:24 Preview : 12,312
ID : 76489
Brand : Miki Pulley
Model : 125
Last Update : 01/06/2560 12:16 Preview : 14,532
The 125 model has a drip-proof-type shaft-to-shaft construction containing a clutch and brake in a light-alloy housing. The power is applied from the input shaft, and is output constantly from the output shaft. Braking of output shaft is performed by the energization of brake in response to the current interruption of clutch. The steel plate base and the casting base (E type) are available. It is easy to mount, and has longer operating time.
ID : 76503
Brand : Miki Pulley
Model : CBW
Last Update : 25/01/2556 14:31 Preview : 12,034
CBW Model (Clutch , brake and reducer)The clutch and brake are mounted on the input shaft of the reducer. The output is performed from the reducer, and the input is performed by belt transmission from the V pulley. As a standard part, V pulley is installed in the input section for easy handling. Installation is completed merely installing a reducer to eliminate troublesome centering and processing. Self inertia is reduced by integrating a reducer for efficient start and stop. A combination with a reducer accomplishes excellent performance for various applications such as a wide range of speed change in combination with a transmission, or a 360-degree revolution stop of the output shaft.
ID : 76504
Brand : Miki Pulley
Model : 121-xx-10
Last Update : 27/11/2560 11:26 Preview : 11,935
121-[]-10 Type (Double clutch)It is a double clutch unit with two clutches set on the both side of drum sharing basic design with clutch-brake unit 121-[]-20. Two-stage speed change and forward-reverse operation with hub input, or distribution of motive power with shaft input can be selected. As well as 121-[]-20, it is strongly resistant to a radial load with a wide bearing span that it can be used with high tension by mounting a V pulley or spur gear.
ID : 76535
Brand : Miki Pulley
Model : BXL
Last Update : 18/10/2555 15:57 Preview : 11,363
BXL Model (Braking)The BXL model is a compact brake exclusively for braking. An asbestos-free special friction material with a high resistance to wear is used to endure use for a long time. Torque fluctuation is small. Load is braked instantaneously even in trouble. A rotor spring reduces a rasping high-frequency friction sound during braking. A quiet braking sound is ensured.
ID : 76539
Brand : Miki Pulley
Model : 458
Last Update : 18/10/2555 16:18 Preview : 9,544
458 Model (Braking and holding)The 458 model is a high-torque brake with longer operating time used for both braking and holding. A special armature reduces a rasping high-frequency friction sound during braking. The braking torque can be adjusted in a wide range by turning the torque adjustment ring. Minimum torque is assured by a double braking construction. Manual lever or dustproof cover is available as options.
ID : 76547
Brand : Miki Pulley
Model : 546
Last Update : 18/10/2555 16:33 Preview : 11,083
546 Model (Toothed clutch)Torque is transmitted by engagement of teeth and large torque can be transmitted even though the clutch is small. There are “full position” with entire circumference engagement and “single position” with fixed position engagement (engaged at one position in one revolution). As a tooth tip configuration, full depth tooth usable in any rotation direction and saw tooth with higher relative velocity engagement are available.
ID : 76599
Brand : Miki Pulley
Model : ETP-T, ETP-T-C
Last Update : 05/04/2563 12:36 Preview : 13,410
Only one pressure screw allows easy and quick mounting and dismounting. A pressure medium sealed inside of the chamber is pressurized by fastening the pressure screw, and moves equally into the sleeve. By the pressurization of a pressure medium, the sleeve is pressured from inside to contract the shaft-sided sleeve and enlarge the hub-sided sleeve to fasten a shaft and hub through the sleeve. Since the ETP-TECHNO uses only one pressure screw to fasten, assembling time of equipment requiring a positioning can be substantially reduced. It is also useful for the place requiring a repetitive mounting and dismounting. Furthermore, a high-precision mounting and ultrahigh-precision positioning can be performed due to its excellent concentricity of 0.006 mm. A simple anti-rust specification with electroless nickel plating (ETP-T-C) is also available. ETP-T TypeOnly one pressure screw allows easy and quick mounting and dismounting. A pressure medium sealed inside of the chamber is pressurized by fastening the pressure screw, and moves equally into the sleeve. By the pressurization of a pressure medium, the sleeve is pressured from inside to contract the shaft-sided sleeve and enlarge the hub-sided sleeve to fasten a shaft and hub through the sleeve. Since the ETP-TECHNO uses only one pressure screw to fasten, assembling time of equipment requiring a positioning can be substantially reduced. It is also useful for the place requiring a repetitive mounting and dismounting. Furthermore, a high-precision mounting and ultrahigh-precision positioning can be performed due to its excellent concentricity of 0.006mm. The standard ETP-T type is a steel specification. ETP-T-C TypeOnly one pressure screw allows easy and quick mounting and dismounting. A pressure medium sealed inside of the chamber is pressurized by fastening the pressure screw, and moves equally into the sleeve. By the pressurization of a pressure medium, the sleeve is pressured from inside to contract the shaft-sided sleeve and enlarge the hub-sided sleeve to fasten a shaft and hub through the sleeve. Since the ETP-TECHNO uses only one pressure screw to fasten, assembling time of equipment requiring a positioning can be substantially reduced. It is also useful for the place requiring a repetitive mounting and dismounting. Furthermore, a high-precision mounting and ultrahigh-precision positioning can be performed due to its excellent concentricity of 0.006mm. The ETP-T-C type is a simple anti-rust specification with electroless nickel plating.
ID : 76752
Brand : Miki Pulley
Model : ETP-A, ETP-A-B, ETP-A-C, ETP-AS, ETP-A-R
Last Update : 10/10/2564 20:29 Preview : 13,703
The clamping bolts placed on the flange surface allow easy and quick mounting and dismounting. A pressure medium sealed inside of the sleeve is compressed by fastening the clamping bolt. By the compression of a pressure medium, the sleeve is pressured from inside to contract the shaft-side sleeve and enlarge the hub-side sleeve to fasten a shaft and hub through the sleeve. Compared with a mechanical-type fastening element, the number of bolts to be used is small. Also, a high-precision fastening is possible with no slotting. A large variety of specifications such as hexagon bolt, simple antirust with electroless nickel plating, stainless steel or short sleeve specification are available.
ID : 76758
Brand : Miki Pulley
Model : PSL-K, PSL-K-C, PSL-K-F, PSL-K-B, PSL-G, PSL-G-C, PSL-D, PSL-D-C
Last Update : 31/07/2561 23:26 Preview : 13,313
The POSI-LOCK is a mechanical-type shaft lock joint. Fasting of clamping bolt produces a wedge effect to perfectly fasten a shaft and hub. The PSL-K type with a small inner and outer diameter ratio of the sleeve to reduce diameters of parts, PSL-G type for a general specification and PSL-D type designed for a medium load with a small surface pressure to reduce diameters and weight of mounted part are available. Also, a large variety of specifications such as simple antirust with electroless nickel plating or stainless steel specification are available.
ID : 76760
Brand : Rosta
Model : DR, DK, DO, SE, RSE, NSE, ESL, V, AU, RST, AB
Last Update : 25/08/2562 14:04 Preview : 14,206
In a word, this product is a shock absorber. The ROSTA is a multifunction and multipurpose product with a unique principle and construction. Three functions, spring, damper and bearing functions, are provided at the same time. It is composed of a metal inner shell, outer shell with 45 deg. of displacement and precompressed cylindrical rubber. In addition to a tensioner, it can be used as a rocking, vibration-proofing equipment or suspension of all industrial machinery based on this suspension unit.
ID : 76762
Brand : Rosta, Miki Pulley
Model : SE, RSE, NSE
Last Update : 04/02/2565 21:47 Preview : 15,291
It can be used as tensioners, pressure rollers or dampers by attaching an arm to the ROSTA suspension unit to set a roller or sprocket. The outer shell has a flange shape and can be mounted using only one center bolt. The mounting hole of idlers can be selected depending on the load range (normal/hard) . The SE model with no idler, the belt tensioner RSE model with idler and the NSE model with sprocket idler are available
ID : 76775
Brand : Miki Pulley, Rosta
Model : ESL, V
Last Update : 10/09/2563 20:01 Preview : 12,358
The vibration isolation mount ROSTA is effective in vibration control for all kinds of machinery. The ESL model corresponding to an intermediate frequency range of eigenfrequency 4.5 to 11Hz and the V model corresponding to a relatively higher frequency range are available. Both models correspond to any mounting direction, also left, light, top, bottom, back and front loading direction.
ID : 76778
Brand : Miki Pulley
Model : P, AP
Last Update : 16/07/2561 12:47 Preview : 14,513
P(AP) ModelThe P (AP) model is a VARI-DIA pulley with standard V-belt that changes the rotation speed by moving the mounting motor to vary the pitch diameter of the belt hung on the pulley forcedly. Mounting is easy by using an adapter. And unique cam mechanism prevents slips. Speed can be changed without changing the center distance in combination with the AP model to use the P model on the driven side.
ID : 76797
Brand : Miki Pulley
Model : PDS, AK, PE
Last Update : 28/01/2556 10:46 Preview : 15,969
When turning the handle of the motor-side speed changer, the width of the speed change pulley will change. By varying the pitch diameter of the speed change belt, the pitch diameter of the machine-side speed change pulley will follow to change the rotation speed. The PDS model is a belt-type stepless speed change drive that is incorporated directly into machines to save space. There are 6 sizes from 0.2kW to 3.7kW (4-pole) of transmission capacity.
ID : 76799
Brand : Miki Pulley
Model : PDG
Last Update : 22/01/2559 16:37 Preview : 15,515
PDG ModelThe PDG model is a non-stage speed change unit combining a speed changer of the PDS model, motor and worm reducer on the bed. Various applications such as changing the motor to a brake motor, setting the reducer output shaft upward or using a two-speed worm reducer are available except the standard PDG-BSN model. For the PDG-BSN model, the motor output of 0.2kW to 3.7kW (4-pole) and the reducer rate of 1/10 to 1/60 are available.
ID : 76800
Brand : Miki Pulley
Model : ANS
Last Update : 07/03/2560 00:09 Preview : 13,548
ANS ModelANS model is a belt-type stepless speed change drive. When turning the handle of the motor-side speed changer, the width of the speed change pulley will change. By varying the pitch diameter of the speed change belt, the pitch diameter of the machine-side speed change pulley will follow to change the rotation speed. Instead of the original coil spring, a disc spring with constant-pressure load is used for the machine-side pulley that follows the pitch diameter of the motor-side pulley. Due to the disc spring, the transmission efficiency is increased, and a stable variable-speed operation becomes possible. This model is incorporated directly into machines to save space. There are 6 sizes from 0.2kW to 3.7kW of transmission capacity. Each of them has a transmission ratio of 1:4.
ID : 76803
Brand : Miki Pulley
Model : E1, E2, Y1, Y2, JK1, JK2, ME1, ME2, MY1, MY2
Last Update : 31/08/2556 04:25 Preview : 13,256
It is a one-way clutch non-stage speed changer that is operable from zero rotation to maximum rotation instantaneously. Speed change is easy with the easy-to-move lever. The unique structure that transmits the rotation by the link and one-way clutch mechanisms is compact and lightweight, and a large speed change ratio at 1:12 can be taken. Also, there is no limit for the mounting direction. Stand-alone speed changer and speed changer with motor are available.
ID : 76808
Brand : Miki Pulley
Model : SFC
Last Update : 13/02/2560 15:22 Preview : 13,113
SFC ModelThe SFC model is a metal disk type coupling with lightweight and high-strength aluminum alloy used for the clamp hub. It has a high torsional rigidity and responsiveness. The SFC-SA2 with single element and ultrahigh rigidity and the SFC-DA2 with double elements and flexibility are available. Each type has a green design corresponding to the RoHS.
ID : 76818
Brand : Miki Pulley
Model : SFS
Last Update : 01/06/2560 12:15 Preview : 12,434
SFS Model The SFS model are metal disk type couplings. Carbon steel is used for the body material. Very high torsional rigidity assures accurate shaft rotation and ultra precision control. A single element type with high rigidity, double-element type with flexibility (two elements are used through a spacer plate) and floating type with a flange between double elements are available. Assembly finished or partly-finished product, frictional fastening or key fastening of shaft, or taper shaft correspondence is available for each type.